No Hot Water? Common Causes & Tips to Fix it Yourself

Call Today

Nearly everybody has got their own piece of advice in relation to How to Troubleshoot and Repair an Electric Water Heater.

Lots of contemporary homes utilize an electric hot water heater for their furnace, as a result of its benefit and ease of use. Nonetheless, similar to any other electric home appliances, problems might emerge with its use, suddenly. It can be really irritating to awaken to a cold shower as opposed to a warm one or having your bath with water that isn't hot adequate or perhaps as well hot. Whatever the instance might be, water heater problems can be fairly stressful. Thankfully, we have actually made a listing of possible remedies to your hot water heater issues. There are a variety of aspects that might cause much of these issues, it could be a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the trouble is, getting it repaired should not present too much of a concern if you comply with these steps:

Inspect Your Power Supply:

As basic as this might seem, it is really needed. Without adequate power, your hot water heater will not operate. So the first thing to do when your water all of a sudden retires is to verify that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the concern, just transform it off and on once more. Replace any kind of broken or damaged fuse. Test the device with power after these changes to see if it's currently working.

Inspect the Burner in the Water Heater:

If it's not a power trouble, then attempt checking out your burner if it is still functioning. Evaluate each of your burner to be sure the trouble isn't with any of them. If any of them is damaged, replace that component and then inspect whether the warm water is back on.

Check Your Thermostat:

If your hot water heater still isn't working or the water appearing isn't hot enough, you might need to inspect the temperature level settings on your upper thermostat. Make certain the circuit breaker is switched off prior to doing anything. Open the gain access to panel as well as press the red switch for temperature reset over the thermostat. This need to help heat up the water. Transform the breaker back on and inspect if the trouble has been fixed.

Call A Specialist:

If after changing all faulty parts and also resetting your temperature level, the water heater still isn't working, you might require to speak to an expert plumber for a professional point of view. The problem with your heating unit could be that the cold and hot taps have actually been switched over or it may be undersized for the amount of warm water required in your home. Whatever the situation might be, a professional plumber would assist fix the trouble.

Conclusion

Water heater issues are not constantly significant. A lot of them are because of small concerns like a blown fuse or worn-out heating element. Changing the damaged components should work. Nevertheless, if you are still incapable to solve the problem, give a call to your closest plumber to find to get it dealt with.

Common Reasons Why Your Hot Water Heater Isn’t Working

Water Gets Too Hot

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

Water Doesn’t Get Hot

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

Leaking Water Heater

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

Noisy Water Heater

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

Pilot Light Keeps Going Out

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

Water Smells Bad

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

Water Looks Brown Or Rusted

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

As a keen person who reads about What Would Cause My Electric Water Heater to Stop Working?, I figured sharing that chunk was smart. Enjoyed our article? Please share it. Help somebody else discover it. Thanks for your time. Please check up our site back soon.

Schedule Appointment Now